VSI sand making machine manufacturer will take you to understand: Introduction to the working principle of sand making machine
Aug 17,2021
The manufacturer of VSI sand making machine tells you that the sand making machine is mainly broken by the hammer, and the hammer is also the vulnerable part of the equipment. It will wear out after a period of use. The manufacturer of VSI sand making machine tells you that if you do not find it in time, you will encounter For hard materials, the hammer head cannot be completely broken, resulting in the materials cannot be discharged in time. At this time, when new materials enter, blockage will occur.
The conveying capacity of the conveyor of the sand making machine exceeds the crushing capacity: The manufacturer of the VSI sand making machine tells you that when the conveying capacity of the conveyor does not match the crushing capacity of the sand making machine, the material will not be broken, and at the same time, the rear material will be quickly poured into the sand making machine. Causes the crushing to fail to block in time.
The tightness of the V-belt of the sand making machine is inappropriate: The VSI sand making machine manufacturer tells you that the production process of the sand making machine relies on the V-belt to transmit power to the sheave wheel, and then crush the stone. The VSI sand making machine manufacturer tells you that when the V-belt is loose, it will cause slipping, because the pulley is rotating, not the driving pulley. The material cannot be crushed under normal crushing force, nor can it be crushed in the crushing chamber, thus blocking the material.
Working principle of sand making machine:
The manufacturer of VSI sand making machine tells you that the material falls vertically from the upper part of the machine into the high-speed rotating impeller. Under the action of high-speed centrifugal force, the material around the impeller and another part of the material around the impeller are crushed at high speed in the form of umbrellas. After the materials collide with each other, The material layer between the impeller and the shell will form a vortex for many times, friction and break, and be discharged from the lower discharge hopper. The manufacturer of VSI sand making machine tells you that a closed circuit is formed many times, and the particle size of the finished product is controlled by the screening equipment.
Related Posts