The powder classifier manufacturer will show you: what is powder classification
Jun 04,2021
The powder classifier manufacturer tells you that the broad classification is to divide the particles into different parts by using the different characteristics of particle size, density, color, shape, chemical composition, radioactivity and so on. The powder classifier manufacturer tells you that the narrow classification is based on the effects of centrifugal force, gravity, inertial force, etc., of particles of different sizes in the medium (usually air and water), resulting in different trajectories, so as to achieve the classification of particles of different sizes.

working principle:
The powder classifier manufacturer tells you that when the slurry is fed into the upper part of the equipment and the rising water flow rate is maintained, the particles of different sizes and weights move according to their certain interference sedimentation speed. The particle group is divided into layers according to the size or weight, and the coarse or heavy particles move downwards. Settling, fine or light particles suspended to the upper layer, the volume concentration of the entire system is getting higher and higher from top to bottom. The powder classifier manufacturer tells you that when the slurry is continuously fed, because the coarse or heavy particles in the lower part of the system continue to increase, the volume concentration increases; the suspension height of the particle group increases, and the pressure at the lower part of the system increases correspondingly. The powder classifier manufacturer tells you that the pressure measuring die inserted into the lower part of the system continuously measures the pressure of this part, and feeds it back to the control system to compare with the set value, so as to manipulate the opening of the discharge valve at the bottom of the equipment to continuously discharge the grit. . The powder classifier manufacturer tells you that the fine or light particles suspended in the upper part of the system continuously flow out of the equipment overflow to achieve the purpose of classification.
Related Posts