PRODUCTS
CONTACT
E-mail:
008613964150961 (Manager Shan)
Address:
No.1 Bicheng Avenue, Haiyang, Yantai, Shandong, China
Azerbaijan INM Series Ultrafine Grinding Mill
Category:
AzerbaijanGrinding Equipment
Product Description
Working Principle
After hammer crushers break large bulky materials to smaller ones,elevator lifts the materials to material bin.Next,materials are sent to the grinding mill evenly and they would fall onto the dispersing plate firstly.When the grinding mill runs,dozens of grinding rollers start to rotate and roll.Under the action of centrifugal force,materials on the dispersing plate are then thrown to the rim and drop to the grinding chamber.In the circuit,materials would be squeezed and ground.After being ground several times,materials are blown into the classifier by airflow.Under the action of the impeller of classifier, materials which fail to meet fineness would be sent back to grinding chamber to get another grinding while qualified powders would be collected by impulse filter collector and they may stick to the surface of filler-bag.So,next,high-pressure airflow controlled by the impulse valve blows the filler-bag to make it swell and shake violently.This sudden shake can help kick off materials on the filler-bag and collect them as finished products.After filtering,the airflow would be discharged to the air.This system adopts an open circuit and runs under negative pressure.
Features
1.High capacity and low consumption.
2.Advanced grinding cavity design.
3.High quality grinding media.
4.Advanced intelligent speed control device.
5.Large range of fineness adjusting.
Technical Data
|
Model |
INM800/21R |
INM900/24R |
INM1000/28R |
INM1250/32R |
INM1680/36R |
|
Working diameter (mm) |
Φ800 |
Φ900 |
Φ1000 |
Φ1250 |
Φ1680 |
|
Max feed size (mm) |
≤20 |
≤20 |
≤20 |
≤20 |
≤20 |
|
Final size (mesh) |
325-2500 |
325-2500 |
325-2500 |
325-2500 |
325-2500 |
|
Output (kg/h) |
500-4500 |
800-6500 |
1000-8500 |
2500-14000 |
5000-25000 |
|
Model |
INM800/21R |
INM900/24R |
INM1000/28R |
INM1250/32R |
INM1680/36R |
|
|
Main motor |
Power |
75 |
45×2 |
132 |
185 |
315 |
|
Classifier motor (FM motor) |
Power |
18.5 |
18.5 |
30 |
75 |
18.5×5 |
|
Blower motor |
Power |
45 |
55 |
75 |
132 |
90×2 |
|
Crusher |
Model |
PC400×600 |
PC400×600 |
PC400×600 |
PC600×800 |
PC600×800 |
|
Power |
18.5 |
18.5 |
18.5 |
45 |
45 |
|
|
Elevator |
Model |
TH-200 |
TH-200 |
TH-300 |
TH-300 |
TH-300 |
|
Power |
3 |
3 |
4 |
5.5 |
7.5 |
|
|
Feeder |
Model |
300×60×1.8 Φ159-1.8 |
300×60×1.8 Φ159-1.8 |
300×60×1.8 Φ159-1.8 |
400×80×2 Φ219-2 |
400×80×2.8 |
|
Power |
1.5/3 |
1.5/3 |
1.5/3 |
1.5/3 |
2.2 |
|
|
Discharge screw conveyor |
Model |
LS219-4.5/LS219-3 |
LS219-5.8 |
LS273-7.5 |
LS315-11 |
LS315-11 |
|
Power |
3 |
3 |
4 |
7.5 |
7.5 |
|
|
Discharge valve |
Model |
ZJD-200 |
ZJD-200 |
ZJD-200 |
ZJD-300 |
ZJD-300 |
|
Power |
0.75 |
0.75 + 1.1 |
0.75+ 1.1 |
1.5 |
1.5+0.75 |
|
|
Pulse dust collectors |
Model |
DMC120/DMC16 |
DMC160 |
LDMC35-8 |
LDMC72-8 |
LDMC400×2 |
|
Air compressor |
Model |
KSH150D/LG1.5-8 |
KSH240D/LG2.4-8 |
KSH300D/LG3.6-8 |
LG6.2-8 |
LG10-8 |
|
Power |
11 |
15 |
22 |
37 |
55 |
|